首页  课题组概况  研究方向  研究成果  成员介绍  实验设备  组内活动  合作交流  联系我们 
新闻动态

祝贺许浩楠等同学的文章被Chemistry...
祝贺朱敏熠等同学的文章被Chem. Com...
祝贺王浩维等同学的文章被Chemical ...
祝贺张瑞平等同学的文章被Angew. Ch...
祝贺刘占凯等同学的文章被ACS Catal...
祝贺武玉泰等同学的文章被Angewandt...
祝贺张雪洁等同学的文章被Nano Rese...

首页
您的位置: 首页>>正文

祝贺巴雅琪等同学的文章被Sustain. Chem. Climate Action接受发表!

2023年03月16日 19:44  点击:[]

祝贺巴雅琪等同学的文章

Fine tuning CO2 adsorption and diffusion behaviors in ultra-microporous carbons for 

favorable CO2 capture at moderate temperature

Sustain. Chem. Climate Action 接受发表!



Abstract

CO2 capture from flue gas is one of the global urgent tasks. Adsorption separation of CO2 is an energy-efficient way as compared to the absorption method. The central issue is to devise efficient adsorbents that work well under flue gas conditions with temperatures of 323-348 K and low CO2 concentrations of 15%. In this work, we targeted this issue and proposed a well-controlled diffusion strategy, which is achieved over a series of poly(furfuryl alcohol)-derived carbons (PFCs) with dense and abundant ultra-micropores. As the adsorption temperature increased from 298 to 348 K, the CO2 capture capacity is 54% kept for PFC-800, which is 1.2 times higher than that for samples without diffusion limitation. The capture of CO2 is kinetics control at ambient temperature, however, at 348 K CO2 with higher kinetic energy can overcome the restriction of the narrow pore entrance and the CO2/N2 selectivity for simulated flue gas composition increases from 20 to 40. Furthermore, the PFCs exhibit a high CO2 volumetric adsorption capacity of 97 cm3 cm-3 at 298 K and 1 bar, benefiting the practical application deployed with an integrated adsorption column. The diffusion kinetics can be further tuned when altering the bulk phase into nanocoating, which would inspire their application in different scenarios.


上一条:祝贺董晓玲等同学的文章被 EnergyChem 接受发表! 下一条:祝贺刘占凯等同学的文章被 Nat. Commun. 接受发表!

关闭

先进能源材料与催化团队 版权所有

本站部分内容来源于网络,版权归原作者或来源机构所有,如果涉及任何版权方面的问题请及时和我们联系,我们将尽快妥善处理!

推荐使用 Internet Explorer 浏览器浏览本站